The full walkthrough for connecting the Hyper RSI indicator on TradingView to the MOABOT webhook.
An RSI + DCA combo strategy — split entries in oversold/overbought zones and 3-stage take-profit to manage average cost.
This guide is a reference only
All settings shown on screen are examples and do not guarantee profits. Adjust based on your capital, risk tolerance, and trading style.
MOABOT is a trading-signal automation tool, not investment advice.
Read first
Every number on screen is an example used to demonstrate the flow. Before live trading, double-check that values match your own capital, strategy, and risk limits.
This document is a reference for learning how to use MOABOT. Following the same settings will not produce the same results.
The example values are only a starting point. Adjust inputs to fit your capital, trading timeframe, and risk tolerance.
Backtest results based on past data do not guarantee future profits. Always consider the possibility of loss.
Exchange API permissions, fund management, and alert-setup accuracy are all the user's responsibility. If in doubt, validate with a small amount first.
Critical · Real-time market data
TradingView delivers KRX, US equities and futures/options on a 15–20 minute delay by default. If you wire MOABOT to a delayed chart, the indicator computes signals on stale prices — and your order at KIS will execute at a very different level than what the chart showed.
KRX (Korea)
15–20 min delayed by default
Add the KRX real-time data subscription on TradingView. Free / unsubscribed accounts will trade on stale prices.
US equities
NASDAQ / NYSE add-on required
Even a paid TradingView plan does not include real-time NASDAQ/NYSE — purchase the exchange data add-on separately.
Futures · Options
Per-exchange data required
CME / EUREX / HKEX etc. each have their own real-time data subscription on TradingView.
This is a TradingView pricing matter — MOABOT cannot override the data delay
How to buy: TradingView profile → "Market data" or open any chart → "Free" badge on the symbol → "Upgrade to real-time".
Before going live, verify your chart no longer shows a delay label (e.g. "D" / "Delayed 15min") next to the symbol.
A one-pass walkthrough: enable MOABOT webhook → open TradingView chart → configure indicator/alert → connect the webhook URL.
Symbol for this exchange
KRX:005930 · NASDAQ:NVDA · CME:ES1!
Estimated time
First setup: ~10–15 min
After that: ~3 min
Requirements
What to do on this screen
Open TradingView Supercharts and click the symbol field on the top-left, then click "Search" to open the symbol search dialog.
Checkpoints
Next: Pick the stock / contract
Swipe horizontally to view the full capture.
Open
What to do on this screen
Select the exact stock or contract you want to trade. The chart price must match the broker that will execute the trade (Korea Investment & Securities).
Checkpoints
Next: Open the timeframe selector
Swipe horizontally to view the full capture.
Open
What to do on this screen
Click "1m" (or the current timeframe label) at the top of the chart to open the timeframe selector.
Next: Pick your trading timeframe
Swipe horizontally to view the full capture.
Open
What to do on this screen
Choose the timeframe to trade on (e.g. 5m / 15m / 1h / 1D for equities).
Checkpoints
Next: Add the invite-only indicator
Swipe horizontally to view the full capture.
Open
What to do on this screen
Top menu → "Indicators" → "Invite-only" → click "[Tradingboost] HYPER RSI_DCAv3.1" to add it to the chart.
Checkpoints
Next: Open indicator settings (Inputs)
Swipe horizontally to view the full capture.
Open
What to do on this screen
Double-click the "HYPER RSI_DCAv3.1" label to open settings. In the "Inputs" tab, enter values that match your trading style.
Checkpoints
Next: Properties — initial capital & commission
Swipe horizontally to view the full capture.
Open
What to do on this screen
In the "Properties" tab, enter only the initial capital and commission for your account, then click "OK".
Checkpoints
Next: Create alert + open message editor
Swipe horizontally to view the full capture.
Open
What to do on this screen
Click the Alerts (clock) icon → "Add alert". Verify Condition = [Tradingboost] HYPER RSI_DCAv3.1 and Interval matches the chart, then click the message field.
Next: Open MOABOT webhook settings (gear icon)
Swipe horizontally to view the full capture.
Open
What to do on this screen
In the MOABOT webhook dashboard, click the gear (settings) icon at the top-right to open the exchange settings panel.
Next: Enable Korea Investment & Securities
Swipe horizontally to view the full capture.
Open
What to do on this screen
Open the "Exchanges" tab → toggle Korea Investment & Securities ON → click "Save changes".
Checkpoints
Next: Webhook ON + TradingView quantity mode
Swipe horizontally to view the full capture.
Open
What to do on this screen
Confirm KIS is shown, turn webhook ON, keep advanced settings OFF, set order mode to "TradingView quantity", then save.
Checkpoints
Next: Copy the strategy alert code
Swipe horizontally to view the full capture.
Open
What to do on this screen
In MOABOT, click the "?" (help) icon → "Format" → "Strategy indicator" to reveal the alert-message template. Copy the entire code.
Checkpoints
Next: Name the alert + paste the message code
Swipe horizontally to view the full capture.
Open
What to do on this screen
Back in TradingView, set the alert name (e.g. HRSI-KIS-005930-15m), paste the copied code into the message field, then click "Apply".
Checkpoints
Next: Notifications tab
Swipe horizontally to view the full capture.
Open
What to do on this screen
Switch to the alert's "Notifications" tab to configure where the alert should be delivered.
Next: Copy your webhook URL
Swipe horizontally to view the full capture.
Open
What to do on this screen
In the MOABOT webhook dashboard, locate your unique webhook URL and copy it.
Checkpoints
Next: Paste the webhook URL
Swipe horizontally to view the full capture.
Open
What to do on this screen
Check the "Webhook URL" box and paste the URL into the input field.
Next: Create the alert
Swipe horizontally to view the full capture.
Open
What to do on this screen
Click "Create" to save the alert.
Next: Verify it is active (clock icon)
Swipe horizontally to view the full capture.
Open
What to do on this screen
Open the alerts panel via the clock icon to confirm the new alert is active. Order fills will appear in your KIS HTS / MTS.
Checkpoints
Swipe horizontally to view the full capture.
Open
Definitions and example starting values for every field. All values are starting points — adjust based on your own capital and trading style.
Defines when the indicator becomes active and the trading direction. Start time must be after the current moment, or back-fired fake signals can fire.
Auto-trade start time
e.g. 2025-11-01 00:00 (after now)
Auto-trade end time
Set far in the future (e.g. 2121-01-01)
Direction
Spot supports long-only. Both / short are for futures accounts.
The RSI calculation base used as the entry trigger. "Source" chooses which candle price feeds the RSI.
RSI source
RSI length
Default 14. Shorter = more signals + more noise.
RSI oversold
e.g. 33. Lower = more conservative entries.
RSI overbought
e.g. 68. Used as a take-profit reference.
Decides when to actually enter after RSI conditions are met, and whether Bollinger Bands work as an extra filter.
Entry method
Bollinger Band filter
Bollinger length
Default 20
Standard deviation multiplier
Default 2 (band width)
How much you enter on the first signal. Always check each exchange's minimum lot size and minimum order amount first.
Initial entry sizing method
Initial contracts / amount / percent
e.g. 0.75% of capital — conservative starting point
After the first entry, if the market moves against you, this configures how to lower the average price with split buys.
DCA contract multiplier
e.g. 1.6 — each step buys 1.6x the previous step
DCA trigger basis
DCA reference price
DCA gap
Maximum entries
e.g. 7 (including 1st — so DCA count is 6)
The basis for splitting position exit. The 3-stage take-profit percentages must sum to 100.
TP basis
TP1 / TP2 / TP3 ratio
e.g. 70 / 10 / 20 — sum = 100
Long / Short targets 1·2·3
Price distance for each target (e.g. ATR 2.3 / 3.1 / 4.1)
Risk management options. Start conservatively and adjust once you understand the behavior.
Stop loss mode
Stop loss basis
Break-even
Trailing stop
After TP3, trail-stop remaining size (e.g. 0.4%)
How to handle leftover size when entries reach high steps, and trend-based filter options.
Position lightening
At a target step, clear a portion (e.g. clear 80% at step 7)
After lightening
Trend options
Re-entry policy, on-chart status table, and consecutive-signal filtering.
ADD ON
Consecutive-entry block
Ignore signals for N candles after entry.
Cool-down candle count
e.g. 5 — wait 5 candles for the next signal.
Separately from the Inputs tab, the "Properties" tab is where the backtest / simulation capital and trade fee live. Do not touch other fields here — the indicator can misbehave.
Initial capital
Actual amount you will trade (USDT or KRW equivalent)
Commission
Exchange spot fee rate — typically 0.05–0.1%
Next
Once setup is complete, the MOABOT webhook dashboard shows incoming signals and order results in real time.